I first bought a Weber BBQ, which lasted a reasonable amount of time before rusting and looking tatty. Since that purchase the price for the same BBQ had gone up an awful lot, so I decided to purchase a replacement from Argos. This was a 6 burner, up from 4, so was pretty decent on paper. In fact, it performed pretty well cooking-wise. What let it down, however, was the fact that only the lid and base / frame was stainless steel. The fire box was, in fact, steel. Guess what? It rusted. While it had rusted all over the fire box, the main issue was that it had rusted badly at the back, specifically on the tiny brackets where the burner covers sat. This meant that one of the burner covers had dropped on to the burner below, making a section of the BBQ unusable.
So, off I went browsing Amazon to find a suitable replacement. I saw the Cosmo Grill BBQs, so had a look on their website, directly. At the time I decided was going to go for the Platinum 4+2, but then egged myself on to get the Platinum 6+2 BBQ. I had to double check about spare parts, though, after being stung with two BBQs where one had outrageously priced parts and the other were simply not available. Sarah at Cosmo Grill was very helpful and responded very quickly, even with it being the weekend, too. She made me feel more comfortable in the product by saying it was all made from stainless steel - I knew it said it on the website, but wasn't sure whether that was just a bit of marketing.
I made a bit of a mess up ordering, as I didn't realise there was a combo offer of the BBQ and cover. Shivani at Cosmo Grill helped sort the order out and was very helpful. I also ordered the rotisserie attachment, too (why not!?).
The delivery was quick and came in no less than 5 packages, with two of them being huge boxes! I thought that either the BBQ was massive, or the packaging was over the top (spoiler, it was both!). Opening up the packaging I tracked down the instructions and went to work. There was relatively little polystyrene packaging, with cardboard being used instead - which I thought was a nice touch. I can't remember where I read it now, but I'm sure I read that it should take 1hr with two people. I was on my own, took it slowly, and it took me 1hr 20mins to build. I would say that the only sketchy bit was putting the firebox on to the stand, as I couldn’t see what I was doing due to the sheer size of it. Speaking of which; it's massive (in a good way). I remember when I finished putting it together, thinking how much it resembled the US-branded BBQs for £2k. I would say that the only real irritation for me when putting it together was that some of the images in the instructions were unclear - like the position of the battery holder for the igniter. When I installed it, roughly in line with the images, the bottom of the fire box (essentially a shelf) wouldn't slide in as the igniter was in the way.
Sarah was absolutely right, though, the BBQ is all stainless steel, with only the obvious components (controls, battery enclosure for LEDs and igniter unit, etc.) being made of plastic. I can't impress upon you how important to me a stainless steel BBQ is. As long as it's looked after well, it will last for a good number of years. I treat the outside with a very light coating of baby oil, which removes any fingerprints and marks. The inside gets a good cleaning with a brush (plastic, not metal, in my case) and a small amount of soap and water (which I wipe dry after it's cleaned).
I've had a dry run with the rotisserie - i.e. I've set it up and switched it on, that's it :). It worked fine, and I suspect whatever cook with it will be great. I've cooked with the BBQ twice, and it's got oodles of power. Heat is retained very well with the lid down. I love the dedicated back burner for the rotisserie and the side burner for pans, etc. I know it's sad, but I like the LED controls, plus the rain cover - I've bought a few from Amazon that while being cheap still offer a life-time guarantee. the problem I found with them is that you just don't want to get them replaced with yet another that will end up going grey and having holes appear. The Cosmo Grill very has a high GSM (by my reckoning when holding both old and this) and so I'm hoping will last a lot longer. It certainly makes water bead up when raining, rather than absorb like others have. I also like the fact that my gas canister fits inside! I'm assuming it's a 15KG canister as it weighs a fair bit and there still is 5cm or so above the top. This means I can leave it inside the BBQ, and not at the side, like all my previous BBQs - a nice touch.
You'll notice I've waffled a bit here, but I felt it was important to give more of a review than the other reviewers, as it might help others with their purchase decision - I thought there wasn't enough information from the reviewers, and so it was more me taking a punt with the purchase than getting s...
Really large and sturdy. Perfect for large family BBQs.
The professionalism of Cosmogrill is beyond this world. The website was quick and easy to use with testimonials from previous buyers was definitely the icing on the cake for me. I am very happy with the product
The BBQ arrived the next day flat packed. It took two of us 3 hours to put together as the instruction manual is not very clear. The least clear instruction is what you have to do with the gas connection. It has a solid black tube attached to a not so flexible hose. This has to be attached to the back of the control knob of the sdie burner. for the price I think that a hose and regulator should be enclosed.
Hi. Thanks for checking in. The BBQ lid has a dent in it and so does the front of the frame. The gas bars dont all light using the ignition. The main bar only ignites the right bar and not the left. Because the gas nossles do not line up with the bars the bars have caused the dials to bend out from the BBQ instead of sitting flush. Hopefully you can help me with these issues. Thanks.